Fujitsu ADJUSTMENT

English

•FEATURES setup screen has the following 4 options.

Adjustment	: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)
Input Terminal	: Can make an input terminal setting such as Video Input. (See P. E-28–E-29.)
Others	: Can make other settings. (See P. E-30–E-33.)

ADJUSTMENT

• Adjusting Dot Clock (Dot Clock) for RGB

You may find that pictures blur, depending on the clock frequency of your PC’s processor.

If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.

Use or to select a value between -60 and +60.

Press to store.

• Adjusting Clock Phase (Clock Phase)			for RGB
You may find that pictures blur, depending on the clock phase of your PC’s processor. If you
experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.
Use	or	to select "Auto" or "Manual".
Auto:		Makes automatic adjustment.
Manual:		Makes manual adjustment.
Use	or	to specify a value between 1 and 32.
Press		to store.	When selecting Manual by Clock Phase
• Adjusting Clamp Position (Clamp Position)			for RGB

Adjusts clamp pulse in accordance with the input signal received from connected equipment.

Use or to specify a value between -8 and 8.

Press to store.

•Selecting the Optimum Dynamic Range of Images (Auto Calibration)

for RGB

Receives a white screen signal and adjusts the dynamic range of images to the optimum.

(1)Select Auto Calibration and press . Auto Calibration screen appears.

(2)Select Execute and press .

Press or to select Yes or No. Yes: Stores the data of Auto Calibration.

No: Disables the execution result of Auto Calibration.

(3)Press to execute.

"Auto Calibration" setting screen

"Yes/No" screen to select

* On-screen information disappears if you do not take any action for about 60 seconds.

E-27