FACTORY SETTINGS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P.
Main corresponding signals (RGB mode)
Display (dots x lines) | Horizontal frequency (kHz) | Vertical frequency (Hz) | Signal |
|
|
|
|
640 x 480 | 31.47 | 59.94 | VGA |
|
|
|
|
640 x 480 | 37.50 | 75.00 | VGA 75 Hz |
|
|
|
|
640 x 480 | 43.27 | 85.01 | VGA 85 Hz |
|
|
|
|
720 x 400 | 31.47 | 70.09 | 400 lines |
|
|
|
|
800 x 600 | 37.88 | 60.32 | SVGA 60 Hz |
|
|
|
|
800 x 600 | 46.88 | 75.00 | SVGA 75 Hz |
|
|
|
|
800 x 600 | 53.67 | 85.06 | SVGA 85 Hz |
|
|
|
|
1024 x 768 | 48.36 | 60.00 | XGA 60 Hz |
|
|
|
|
1024 x 768 | 60.02 | 75.03 | XGA 75 Hz |
|
|
|
|
1024 x 768 | 68.68 | 84.99 | XGA 85 Hz |
|
|
|
|
1280 x 1024 | 63.98 | 60.02 | SXGA 60 Hz |
|
|
|
|
1280 x 1024 | 79.98 | 75.03 | SXGA 75 Hz |
|
|
|
|
1600 x 1200 | 75.00 | 60.00 | UXGA 60 Hz |
|
|
|
|
1600 x 1200 | 106.25 | 85.00 | UXGA 85 Hz |
|
|
|
|
848 x 480 | 31.02 | 60.00 |
|
|
|
|
|
852 x 480 | 31.72 | 59.97 |
|
|
|
|
|
1360 x 768 | 47.71 | 60.01 |
|
|
|
|
|
720 x 485 | 15.73 | 59.94 | 60 fields |
|
|
|
|
720 x 575 | 15.63 | 50.00 | 50 fields |
*With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
In the
Main corresponding signals (Video,
Horizontal | Vertical | Signal | |
frequency (kHz) | frequency (Hz) | ||
| |||
|
|
| |
15.73 | 59.94 | NTSC | |
|
|
| |
15.63 | 50.00 | PAL | |
|
|
| |
15.63 | 50.00 | SECAM | |
|
|
| |
15.63 | 59.52 | PAL60 | |
|
|
| |
15.73 | 59.94 | 4.43NTSC | |
|
|
|
English
•Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
•“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.
•You can check input signals through “Information” on the FEATURES Menu screen. (See P.
•In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
•All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.