•Selecting BNC Input (BNC-Input)

You can use this option to select the signal system it will receive to BNC Input terminal.

(1)Select BNC Input and press . BNC Input screen appears.

(2)Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-Video:

For using 0.3V input of sync. signal level with RGB signal input.

RGB-PC:

For using PC wih RGB signal input.

Decoder:

For using decoder with RGB signal input.

(3)Press or to select Mask.

(4)Select RGB-Video or Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off:

Does not mask.

Number:

Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

(5) Press

to store.

English

"BNC-Input" selection screen

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1234567890123456789012345678901

This fringe part is masked.

•Selecting D-SUB Input (D-SUB Input)

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1)Select D-SUB Input and press . D-SUB Input screen appears.

(2)Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3)Press or to select Mask.

(4)Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off: Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of

 

pixels specified.

(5) Press

to store.

* On-screen information disappears if you do not take any action for about 60 seconds.

"D-SUB Input" selection screen

1234567890123456789012345678901

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

This fringe part is masked.

E-29