E-12
USING THE REMOTE CONTROL
To prevent malfunction, be sure not to apply any form of severe shock to the remot e control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, su ch as benzene or thinner.

PUTTING BATTERIES IN THE REMOTE CONTROL

(1) To remove the c over, slide it outwards
while pressing it down.
(2) Place two AA batteries in the remote
control. Make sure that the batteries are
properly oriented.
(3) Close the cover until it snaps into place.

PRECAUTIONS

CAUTION
Be sure to use replacement batteries of the same typ e as the original ones.
When disposing of used batteries, please comply w ith governmental regulations or environmental pu blic institution’s rules that apply in your country/
area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replac e them as needed.
Do not use rechargeable batteries (Ni-Cd, etc).
MHD01862_E.book 12 ページ ２００５年６月１４日　火曜日　午前１１時５０分