E-7
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語 Póññêèé
中文
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Stand-by
Lit (green): Power ON
Flashing (red or green):Malfunction (Flashes differently depending on the type of malfunction.)
Remote control signal receiver
Receives signals from the remote control.
/l power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the re mote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts even if the indicator lamp is off.
Video3, S-video input terminal *
Connect this terminal to the S-video output termin al of your video camera, etc.
Video3, video input terminal *
Connect this terminal to the video output terminal of your video camera, etc.
Audio input terminals (L/R)
These are the audio input terminals for the Video3 and RGB3 terminals.
Input the audio for the video to be seen here.
RGB3 input terminal
Connect this terminal to your PC's mD-sub output t erminal.
* On selecting the video input format
(See "SETTING THE INPUT TERMINALS" on P.E-40.)
AV SELECTOR SECTION – FRONT
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem . When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can resul t in fire or electric shock.
MHD01862_E.book 7 ページ ２００５年６月１４日　火曜日　午前１１時５０分