E-8
PART NAMES AND FUNCTIONS (Continued)
Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with th e remote control. (See P.E-29.)
Audio output terminals
For use when the audio from an audio system (amplifier) is used.
Video1 input terminal
Video2 input terminal
Video4 input terminal
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
* See "SETTING THE INPUT TERMINALS" on P.E-40.
Video5 input terminal
Video6 input terminal
Connect this terminal to the component video output terminal of your DVD, etc.
Video7 input terminal
Connect this terminal to the HDMI output terminal of your DVD, etc.
RGB1 input terminal
Connect this terminal to the monitor (DVI-D) output terminal of your PC.
RGB2 input terminal
Connect this terminal to the monitor (mD-sub) output terminal of your PC.
Display output terminals (Picture/Audio)
Connect these terminals to the picture input terminal and audio input terminals on the di splay.
Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-14.)
Antenna input terminal
Please connect it to the antenna signal.
AV SELECTOR SECTION – REAR

ӽ

MHD01862_E.book 8 ページ ２００５年６月１４日　火曜日　午前１１時５０分