E-43
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語 Póññêèé
中文
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press or , one of the available choices appears in the following seque nce:
On Off
Press to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press .
The “Information” screen will appear.
[Mode]: Input mode appears at the upper right corner of the scree n
[Freq. Scan Mode]: Frequency scanning
[Input Signal]: Video mode
[Input Sync.]: Signal type
[Freq.]: Synchronized signal frequency, polarity
[Preset No.]: RGB code number
Information screen (Video Mode)
Information screen (RGB Mode)
Status Display Screen (TV Mode)
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available .
• The adjustment range varies according to the display signals. Make adjustments to your preferre d Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01862_E.book 43 ページ ２００５年６月１４日 火曜日 午前１１時５０分