Fujitsu P42XHA58E, P50XHA58E E or F

E-34

OTHER ADJUSTMENTS (Continued)

Setting Exhibition Mode (Exhibition Mode)

You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.

Each time you press

E or F, one of the available choices appears in the following sequence:

<

Off

<

On

<

Press < to store.

*In Exhibition mode, the display returns to the memorized setting after about 5 minutes even if the adjustment is changed.

*The setup will be cancelled when AC power is cut to the plasma display’s power cord (e.g. power failure, unplugging the power cord, and

so on).

Displaying System Status (Information)

Displays system operation status.

Select “Information” and press <.

The “Information” screen will appear.

[Mode]: Input mode appears at the upper right corner of the screen

[Freq. Scan Mode]: Frequency scanning

[Input Signal]: Video mode

[Input Sync.]: Signal type

[Freq.]: Synchronized signal frequency, polarity

[Preset No.]: RGB code number

Information screen (Video Mode)

Information screen (RGB Mode)

Note

• If the operation is not executed for about 60 seconds, the menu disappears.

• Depending on the model or the optional devices, some of the functions may not be available.

• The adjustment range varie s according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.

• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

7459_E.book 34 ページ２００６年４月３０日　日曜日　午前１１時３６分

Contents

Main Contents USER'S MANUAL WIDE PLASMA DISPLAY P42XHA58E P50XHA58E INFORMATION CHECKING ACCESSORIES ATTACHING THE FERRITE CORES INSTALLATION PART NAMES AND FUNCTIONS DISPLAY SECTION FRONT Page Page PART NAMES AND FUNCTIONS (Continued) DESCRIPTION OF INPUT TERMINALS TRADEMARK INFOMATION USING THE REMOTE CONTROL REMOTE CONTROL CDEF < 12 USING THE REMOTE CONTROL (Continued) PUTTING BATTERIES IN THE REMOTE CONTROL Display front Display side PRECAUTIONS EFFECTIVE RANGE FOR THE REMOTE CONTROL CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) DVD RECORDER/PLAYER, SATELLITE TUNER Display bottom VCR PC BASIC OPERATIONS 1 TURNING THE POWER ON AND STAND-BY 4 3 2 1 VIDEO INPUT M ODE 1 mode. RGB INPUT MODE OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS On-screen information Picture Mode Picture Memory 1 SWITCHING BETWEEN SCREEN SIZES 2 WATCHING PICTURES ON THE WIDE SCREEN (Continued) ASPECT RATIO Normal (Video/RGB) Wide1 (Video) ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. MENU Note BASIC PROCEDURES OF ADJUSTMENT MENU 1 2 E or F 3 4 5 ADJUSTING THE PICTURE Setting Picture Mode E or F Precision Setting Setting Picture Memory Adjusting the Black Level Setting Detail Gradation PRECISION SETTING Page Setting the Color Focus E and F Making the Progressive Scan Settings E or F ADJUSTING SCREEN POSITION AND SIZE ADJUSTING AUDIO OTHER ADJUSTMENTS CD , and then adjust with E F. Finally, press < to implement the adjustments. ADJUSTMENT Setting Display Information (OSD) E or F Selecting Language (Language) Selection of indications (Name Select) ON SCREEN MENU Selecting the settings of Video/S-video Input terminal E or F Selecting the settings of D-SUB Input terminal SETTING THE INPUT TERMINALS Page Minimizing phosphor burn-in (Screen Orbiter) < Setting RGB Input Signal Compulsorily (Direct Setting) Specifying RGB Input Signal (Code Setting) Displaying white over entire screen (White Screen) Setting Exhibition Mode (Exhibition Mode) E or F Displaying System Status (Information) INITIALIZATION OF USER ADJUSTMENT VALUE 1 2 6 E or F 3 OPTIONS MAIN SUPPORTED SIGNALS SPECIFICATIONS WIDE PLASMA DISPLAY CLEANING AND MAINTENANCE Precautions Cleaning the Screen Cleaning the Cabinet and Remote Control Cleaning the ventilation grille