E-20
BASIC PROCEDURES OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the options on the ADJUSTMENT MENU. (Ex.: Adjusting tint setting (Tint))
Selecting the adjustment mode for adjustment or setting. (The items to be adjusted or set are stored for each adjustment mode.)
1Press ;.
The main menu screen will appear.
2Press E or F to select “PICTURE”.
Each time you press
E or F, one of the available
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES <
FACTORY DEFAULT
The PICTURE Menu screen will appear.
3Press C or D to select “Tint”.
4Press <.
The “Tint” adjustment screen will appear.
5Press E or F to change tint values.
F: More greenish colors
E: More purplish colors
6Press < to store.
7Press ; when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select “Default” and press “ENTER”.
The PICTURE items are changed back to the default
settings available when the plasma display was
purchased.
* Press
;
to halt the operation in progress.
“PICTURE” selected in the main
menu screen
“Tint” selected in the PICTURE
Menu screen
“Tint” adjustment screen
Note
• On-screen information disappears if you do not take any action for about 60 seconds.
• Functions may not be ava ilable with some models and some device options.
• The adjustment range varie s with the display signal. You can adjust the display quality to the value you want within the adjustable range.
7459_E.book 20 ページ ２００６年４月３０日 日曜日 午前１１時３６分