E-29
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語 Póññêèé
中文
OTHER ADJUSTMENTS
FEATURES setup screen has the following 4 options.
See Page E-20 for the basic procedures.
[Adjustment]: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
[On Screen Menu]: Can make a display setting such as OSD, Language. (See P.E-30.)
[Input Terminal]: Can make an input terminal setting such as Video Input. (See P.E-31.)
[Others]: Used to make Screen Orbiter and other settings. (See P.E-32–E-34.)
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with

CD , and then adjust with E F. Finally, press < to implement the adjustments.

ADJUSTMENT

Adjustment Item Contents of Adjustments Operation
Dot Clock
(mD-sub)
You may find the vertically-striped pattern in pictures,
depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer picture by
adjusting the “Dot Clock”.
Use E F to adjust to minimize vertically-
striped pattern in pictures.
Clock Phase
(mD-sub)
Pictures and the outline of letters may blur or flicker as the
clock phase of your PC may be different. In this case, adjust the
clock phase manually. Normally, the automatic setting ensures
the optimal value.
Use E F to adjust to minimize pictures blur.
Clamp Position
(mD-sub, Comp.
video)
Adjusts the extremely dark or bright pictures. Normally, the
automatic setting ensures the optimal value. Use E F to adjust pictures optimally.
Auto Calibration
(mD-sub)
Adjusts the dynamic range of images to the optimum.
Performed while a white screen signal is received.
Display the Auto Calibration screen and select
Execute, and then use CD to select the
item.
7459_E.book 29 ページ ２００６年４月３０日　日曜日　午前１１時３６分