Fujitsu P7010 Primary Master Submenu of the Main Menu, Advanced, Security, Power, Boot, Exit

M a i n M e n u

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies which ATA devices are installed.

Note: Actual hard drive label shown may vary. Depending on the drive type, information such as cylinders, heads and sectors may also be displayed.

		PhoenixBIOS Setup Utility
Main	Advanced	Security			Power	Boot	Info	Exit
	Primary Master [FUJITSU MHT2040AT -(PM)]							Item Specific Help
Type:							Select ATA/ATAPI drive
				[Auto]
		LBA Format					installed here.
Total Sectors:			78140160				[Auto]
Maximum Capacity:			40008MB
							The BIOS auto-types the
Multi-Sector Transfers:			[16 Sectors]				drive on boot time.
LBA Mode Control:			[Enabled]				Except [Auto]
Transfer Mode:			[Multiword DMA 2]
Ultra DMA Mode:			[Disabled]				You enter parameters of
							the drive.
							[None]
							The drive is disabled.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/SpaceChange Values

Enter Select ▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 2. Primary Master Submenu

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	n	Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the type
	n	None		automatically identified by the BIOS at POST. If None is selected, all
	n	CD-ROM		of the following Set-up items do not appear. Select CD-ROM if a
	n	Hard Disk		CD-ROM drive is installed at this connection. If Hard Disk is
				selected, you must specify the number of Cylinders, Heads, and
				Sectors for the drive.

LBA Format			Logical Block Addressing (LBA)
Total	---	---	The total number of sectors on your hard disk
Sectors:
Maximum	---	---	The maximum capacity of your hard disk
Capacity:

5