Fujitsu P7010 Secondary Master Submenu of the Main Menu, may also be displayed, Auto, ESC Exit

		M a i n M e n u
Secondary Master Submenu of the Main Menu
	Note: Actual drive label shown may vary. Depending on the
The Secondary Master submenu identifies which ATA	drive type, information such as cylinders, heads and sectors
	may also be displayed.
devices are installed.

PhoenixBIOS Setup Utility

Main Advanced Security Power Boot Info Exit

Secondary Master [UJDA755 DVD/CDRW -(SM)]

Type:	[Auto]]
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]
Transfer Mode:	[Standard]
Ultra DMA Mode:	[Disabled]

Item Specific Help

Select ATA/ATAPI drive installed here.

[Auto]

The BIOS auto-types the drive on boot time.

Except [Auto]

You enter parameters of the drive.

[None]

The drive is disabled.

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 3. Secondary Master Submenu

F9 Setup Defaults

F10 Save and Exit

Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu

Menu Field	Options	Default	Description
Type:	• Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the type
	• None		automatically identified by the BIOS at POST. If None is
	• Hard Disk		selected, all of the following Set-up items do not appear. If Hard
	• CD-ROM		Disk is selected, you must specify the number of Cylinders,
			Heads, and Sectors for the drive. Select CD-ROM to select
			parameters for CD-ROM drive.
Cylinders:	• A number	–—	This item appears only when the type is identified as Hard Disk.
	between 0		When Hard Disk is selected, you can change the value. This field
	and 65,535		is changed by incrementing (pressing the [Spacebar]) or by typ-
			ing in the number.
Heads:	• A number	–—	This item appears only when the type is identified as Auto or
	between 1 and 16		Hard Disk. When Hard Disk is selected, you can change the
			value. This field is changed by incrementing (pressing the
			[Spacebar]) or by typing in the number.

7