NAMES OF PARTS AND THEIR FUNCTIONS
Rear view
Power switch
•When pressed, power lamp ➀ lights red, and the power can be turned on or off by the remote controller. When this switch is pressed again, the power is cut and power lamp ➀ goes off.
Power input terminal
•Firmly insert the accessory power cord as far as it will go into the power input terminal.
•Firmly push the power cord plug as far as it will go into the power socket.
Video input terminal (VIDEO INPUT)
•Connects to the video output terminal of a video deck or video disc player.
S video input terminal (S-VIDEO INPUT)
•Connects to the S video output terminal of a video deck or video disc player.
Component video input terminal (COMPONENT VIDEO INPUT)
•Connects to the component video output terminal of DVD and similar devices.
RGB input terminal (RGB INPUT)
•Connects to the computer monitor's (analog RGB) output terminal.
Cables connecting the personal computer vary ac- cording to the type of machine, so consult your prod- uct dealer.
RS-232C input terminal (RS-232C)
• Connects to the computer
Audio input terminals (AUDIO INPUT)
•Connects to the audio output terminal of a video deck or similar device.
Sync switch (SYNC SW TTL/ANALOG (75 Ω)
•For switching the RGB terminals'
When an analog synchronous signal is input at the
RGB terminal, be sure that this switch is set to ANA- LOG (75 Ω). For connection to a personal computer,
be sure it is set to TTL.
1 2