Manuals / Fujitsu / Computer Equipment / Computer Monitor

Fujitsu PDS4203W-H / PDS4203E-H Factory-set signals, Personal Computers That Can Be Connected

Models: PDS4203W-H / PDS4203E-H

1 44

Download 44 pages 11.73 Kb

Page 40

PERSONAL COMPUTERS THAT CAN BE CONNECTED

PERSONAL COMPUTERS THAT CAN BE CONNECTED

The Plasmavision is set at the factory with adjustment values for 11 types of signals. (See the table below.) When any of these signals is input, it is automatically discriminated. For these signals, the desired screen can be adjusted according to the instructions on adjusting the screen.

The Plasmavision can also store settings for five types of signals in addition to those set at the factory, as shown in the table below. Input the signals whose settings are to be stored into memory and adjust for the desired screen following the instructions on adjusting the screen. Release the adjustment button to automatically store the level into memory. After adjustment, when the same signals are input, they are displayed with the setting levels last stored into memory.

Factory-set signals

	Mode	Display	Horizontal frequency	Vertical frequency	Supported signal
	number	(dots ⋅ lines)	(kHz)	(Hz)	Supported signal
	number	(dots ⋅ lines)	(kHz)	(Hz)

	1	852 ⋅ 480	31.72	59.97	Note1 When dedicated
	1	852 ⋅ 480	31.72	59.97	graphics board used
					graphics board used

	2	640 ⋅ 480	31.47	59.94	VGA

	3	640 ⋅ 480	37.86	72.81	VGA 72 Hz

	4	640 ⋅ 480	37.50	75.00	VGA 75 Hz

	5	720 ⋅ 400	31.47	70.09	VGA 400 lines

	6	640 ⋅ 480	34.97	66.61	MAC 13RGB (1)

		640 ⋅ 480	35.00	66.67	MAC 13RGB (2)
		640 ⋅ 480	35.00	66.67	MAC 13RGB (2)

	7	640 ⋅ 400	24.83	56.42	PC98 24kHz

	8	640 ⋅ 400	31.50	70.15	PC98 31kHz

	9	800 ⋅ 600	35.16	56.25	SVGA 56 Hz Note2

	10	640 ⋅ 480	15.73	59.94	60 fields

	11	640 ⋅ 480	15.63	50.00	50 fields

	12
	13

14

15.63 to 60.00

50.00 to 75.00

User settings

15

16

Note 1: The dedicated graphics board is an optional product.

2:The 800 x 600 mode is compressed display through compression interpolation. Also, the screen display is also compressed for display.

Points about usage

The company names and product names in this document are trademarks or registered trademarks of their respective com- panies.

The mode numbers indicate the SIGNAL INFORMATION modes set for the RGB mode and input source.

4 0

Image 40

Fujitsu PDS4203W-H / PDS4203E-H Factory-set signals, Personal Computers That Can Be Connected, Mode, Display, number

Contents

USER’S MANUAL 42” WIDE PLASMA DISPLAYPD S4 2 0 3 W- H/P DS 4 2 0 3 E -H C o n t e n t sDECLARATION OF CONFORMITY declares under our sole responsibility that the productBy conformance with the standard referenced, the product follows the provisions of the directives listed belowIMPORTANT SAFEGUARDS IMPORTANT INFORMATIONFCC NOTICE ENGLISHSAFETY PRECAUTIONS Use only the accessory cord designed for this product to prevent shock ENGLISHFEATURES VERTICAL INSTALLATIONCONVENIENT POWER MANAGEMENT FUNCTION PLASMAVISION SUPPORTSACCESSORIES Checking AccessoriesConnecting to External Equipment Cable clampersWhen desktop stand used When wall-mounting unit used horizontallyWhen ceiling-mounting WHAT YOU SHOULD KNOWWhen wall-mounting unit used vertically ENGLISHFront view Side viewPREVENTING EQUIPMENT FROM FALLING ATTACHING TO WALL OR COLUMNATTACHING TO DESKTOP STAND that the equipment cannot topple overNAMES OF PARTS AND THEIR FUNCTIONS Front viewBottom view Power lampRear view Power switchPower input terminal Sync switch SYNC SW TTL/ANALOG 75 ΩA Remote controller For the adjustment menu, see the pages belowPOWER button P15 MODE button P15Handling the remote controller Reception range of remote controllerNAMES OF PARTS AND THEIR FUNCTIONS Loading the batteriesSwitch on the main power switch 1 Press the POWER button2 Select the video mode ∗ Adjusting the volumeVIEWING WIDE SCREEN VIDEO MODE SWITCHING THE WIDE SCREEN AUTOMATICALLY2 With the WIDE button, select AUTO mode 1 Press the WIDE buttonSETTING THE DESIRED WIDE SCREEN SIZE SCREENS ASPECT RATIO2 Use the WIDE button to select the desired screen size 1 Press the WIDE buttonVIEWING WIDE SCREEN RGB MODE SETTING THE DESIRED WIDE SCREEN SIZENORMAL WIDE Example When WIDE is selected 1 Press the WIDE buttonWIDE SCREEN MODES RGB MODE When the screen is vertically wideENGLISH Points about usageON-SCREEN DISPLAY SETTING 2 Select the adjustment item3 Set the desired setting ∗ To complete adjustmentsINTERNAL SPEAKER SETTING 1 Select COMMON SETTINGS from the VIDEO MENU screen3 Set the internal speakers 2 Select the adjustment itemWHITE BALANCE SETTING 3 Adjust to the desired white balance1 Select COMMON SETTINGS from the VIDEO MENU screen 2 Select the adjustment itemDPMS AND DISPLAY LANGUAGE SETTING LANGUAGE DISPLAY LANGUAGE SETTINGDPMS SETTING The time until the power conservation function operates can be setVIDEO ADJUSTMENTS VIDEO MODE EXAMPLE ADJUSTING THE BRIGHTNESS3 Adjust to the desired pic- ture 1 Select PICTURE from the VIDEO MENU screenVIDEO ADJUSTMENT ITEMS BRIGHTNESSCONTRAST COLOR color saturationSCREEN ADJUSTMENT VIDEO MODE EXAMPLE ADJUSTING THE SCREEN VERTICAL POSITION3 Adjust with the ADJUST button 1 Select POSITION/SIZE from the VIDEO MENU screenADJUSTMENT ITEM LIST ADJUSTMENT CRITERIA VERTICAL POSITIONHEIGHT HORIZONTAL POSITIONINPUT SOURCE ADJUSTMENTS VIDEO MODE EXAMPLE SETTING COMPONENT VIDEO1 Select SOURCE from the VIDEO MENU screen 3 Set the connected equip- mentSETTING VIDEO SYSTEM AND CLAMP PULSE VIDEO SYSTEMCLAMP PULSE ENGLISHOTHER ADJUSTMENTS VIDEO MODE EXAMPLE MAKING THE GAMMA SETTING1 Select OTHERS from the VIDEO MENU screen 2 Select the adjustment itemGRADATION OTHER ADJUSTMENT ITEMSENGLISH VIDEO ADJUSTMENTS RGB MODE EXAMPLE ADJUSTING THE CONTRAST1 Select PICTURE from the RGB MENU screen 2 Select the adjustment itemVIDEO ADJUSTMENT ITEMS BRIGHTNESS MENU RETURN SET NEXT ADJUSTBRIGHTNESS CONTRASTSCREEN ADJUSTMENT RGB MODE E X A M P L E ADJUSTING THE HEIGHT OF THE SCREEN1 Select POSITION/SIZE f r o m t h e R G B M E N U screen 2 Select the adjustment itemVERTICAL LINE ADJUSTMENT ITEM LIST ADJUSTMENT CRITERIAVERTICAL POSITION HEIGHTINPUT SOURCE ADJUSTMENTS RGB MODE EXAMPLE SETTING MACINTOSH MODE3 Select the appropriate mode for the dot clock 1 Select SOURCE from the RGB MENU screenOTHER ADJUSTMENTS AND CHECK ITEMS SIGNAL INFORMATIONCLAMP PULSE ENGLISHOTHER ADJUSTMENTS RGB MODE EXAMPLE SETTING THE GRADATION1 Select OTHERS from the RGB MENU screen 2 Select the adjustment itemOTHER ADJUSTMENT ITEMS ADJUSTMENT CRITERIA CLOCK PHASESYNC PHASE GAMMAFactory-set signals Supported signalPERSONAL COMPUTERS THAT CAN BE CONNECTED ModeRequest your product dealer to mount and install these products OPTIONAL PRODUCTSENGLISH Model name SPECIFICATIONSPDS4203W-H/PDS4203E-H RGB input terminal Display is RGB INPUT RS-232C input terminal Display is RS-232CRegulation····PDS4203W-H/PDS4203E-H ENGLISHCARE AND MAINTENANCE BEFORE CLEANINGAlways unplug the power cord from the socket Cleaning the cabinet and remote controller