Fujitsu manual System configurator and order-information guide, PRIMERGY R450, Status, Section

Start PRIMERGY R450

System configurator and order-information guide

PRIMERGY R450 Status 2003-10-24

Section I Basic unit

Rack basic unit 4U including 1 x Xeon MP CPU

2 channel

S26361-K845-V200	1,5GHz 1 MB TLC
S26361-K845-V201	1,9GHz 1 MB TLC
S26361-K845-V202	2 GHz 2 MB TLC

The PRIMERGY R450 basic unit comes with:

-3 power supply module, hot-plug redundant

-2 channel HD PBay with 3 HD bays each

-1 floppy disk drive 1,44MB

-2 hot-replace and redundant fans

-a CPU Board for up to 4x Xeon CPUs

-a Memory Board for 16 memory slots

-I/O section with

-System Management Processor

-Dual LVD/U3W-SCSI controller (Adaptec 7899)

-VGA graphics 8 MB ATI

-LAN 10/100 Mbit with RJ45 connector (Intel 82559)

-5 64bit / 100 MHz PCI-x slots, 1 64bit / 66 MHz slot, all hot-plug

-2 32bit / 33 MHz long PCI slots

-ServerStart packet incl. ServerBooks CD, ServerSupport CD and ServerView

Mounting kit for PRIMERGY R450

-1 pair of telescopic rails (730-810mm)

-1 pair of carrier rails

-1 bracket PC-Rack

-1 cable management PC-racks

Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in deepth from 730-810mm

	PRIMERGY PRIMECENTER- Rack
			External Interfaces				External Interfaces for ServerManagement
SNP:SY-F1647E301-P			2 x RS-232-C (serial, 9 pin)				1 x RS-232-C (serial, 9 pin)
Installation ex works for one			1x Centronics (parallel, 25 pin,				1 x RJ45 LAN
server or subsystem.				EPP/ECP compatible)			1 x Power Jack
Hereby the rack will be delivered			1 x keyboard (PS/2)
completely pre-mounted and			1 x mouse (PS/2)
all wired connections are tested.			1 x VGA (15 pin)
With racks 12U, 24U, 38U:			1 x USB Frontside
Systems and components			2 x USB Backside
will be delivered installed in the rack			1 x RJ45 LAN
With racks 46U:
Systems and components
will be delivered separately					"Rack-mounting ex factory"
To be ordered only together with					This service is to be ordered once
a PRIMERGY-					per installable server/storage
PRIMECENTER rack					subsystem, in order to get the
e.g.:					server/storage subsystem
S26361-K826-V10x					mounted into the PRIMERGY racks.
refer configurator PC-Rack					In case of the 46 U PRIMERGY Rack,
max. 1x per System					this service has to be ordered,
					to get the mounting kits and the
					cables installed
						PRIMERGY 42/23U Rack
		important notice !				This kit can be ordered,
		the mounting kit for PRIMERGY R450				if it is planned to mount the rack
		is included the basic version and				version in an already available
		will be delivered with every R450				FSC 42/23U rack
						S26361-F1331-L141
						Mounting kit for 42/23U rack
						- 1 pair of carrier rails
						- 1 pair of telescopic rails
						- 1 cable carrier
						max. 1x per system
	A

Fujitsu Siemens Computers	5 of 12
Enterprise Products - PRIMERGY Server