Fujitsu manual System configurator and order-information guide, PRIMERGY R450, Status, Section

A

System configurator and order-information guide

PRIMERGY R450 Status 2003-10-24

There are 3 bays for hot-plug power supplies, each with 500W Each basic unit contains 3 modules and provides redundancy for a fully equipped system

Section II Processor

up to 3x

A mix of processors with different clock frequency and different On-Chip cache cannot be used The multi-processor system premises a multi-processor operating system

Terminators are not necessary

S26361-F2817-E151	S26361-F2817-E191	S26361-F2817-E202
XEON MP 1,5GHz	XEON MP 1,9GHz	XEON MP 2GHz
with 1 MB TLC on Chip,	with 1 MB TLC on Chip,	with 2MB TLC on Chip,
heat sink and "Easy retention"	heat sink and "Easy retention"	heat sink and "Easy retention"
occupies slot for one CPU	occupies slot for one CPU	occupies slot for one CPU
max. 3x per system	max. 3x per system	max. 3x per system

Section III Memory

There are 16 memory slots available (4 banks, 4 modules each)

They can optionally be equipped with 128 MB, 256 MB, 512 MB or 1GB registered DDR-RAM modules (PC1600)

The maximal extension is 16 GB with today available 1GB modules!

Any mix of modules within one memory bank is not allowed

ECC with memory scrubbing and chipkill is standard

Optional hot-spare memory functionality can be configured in the BIOS (redundant memory bank 3 + 1)

4x

S26361-F2550-E542

Main memory 512MB PC1600 registered DDR RAM

consisting of 4 modules

occupies one bank

max. 4x per system

S26361-F2550-E543

Main memory 1024MB PC1600 registered DDR RAM

consisting of 4 modules

occupies one bank

max. 4x per system

S26361-F2550-E544

Main memory 2048MB PC1600 registered DDR RAM

consisting of 4 modules

occupies one bank

max. 4x per system

S26361-F2550-E545

Main memory 4096MB PC1600 registered DDR RAM

consisting of 4 modules

occupies one bank

max. 4x per system

Section IV Graphics

B

Fujitsu Siemens Computers	6 of 12
Enterprise Products - PRIMERGY Server