Fujitsu R450 manual Section Disk Array

D

System configurator and order-information guide

PRIMERGY R450 Status 2003-10-24

Section VIII

Disk Array

D. 0-channel Ultra RAID Controller

The following cabling is standard, if any Disk Array Controller is used

1.Channel A of the RAID Controller is connected to the 1st backplane for 3 HDs

2.Channel B of the RAID Controller is connected to the 2nd backplane for 3 HDs

			S26361-F2728-E48				zero-channel RAID Controller Adaptec 2000S
			Zero-channel RAID Controller				is always to be installed in slot 6
			Adaptec
			2000 S
			48MB SDRAM ECC Cache
			in combination with on-board
			U160 SCSI Controller
			without cable					S26361-F2569-E64
			incl. SW and description (Ger/US)					2-channel RAID Controller U160
			64/66 PCI Controller					Mylex / LSI
			3.3V signaling					AcceleRAID 352 (Leopard)
			max. 1x per system					64MB SDRAM ECC Cache
								BBU optional
								Connector: internal 2x HD68;
			S26361-F2385-E32			The cables for the connection of the		external: 2x VHDCI
			2-channel RAID Controller U160			RAID Controller to the disks in the system		without cable
			Adaptec			are included within the basic unit.		incl. SW and description (Ger/US)
			3200 S					64/33 PCI Controller, 330mm
			32MB SDRAM ECC Cache			The cables of the connection from the		3.3V and 5V tolerant signaling
			BBU optional			subsystems (SX30 / S60) to the RAID		max. 4x per system
			connector: int. 2x HD68;			Controllers, see configurator SX30 / S60
			ext. 2x VHDCI
			without cable					S26361-F2569-E10
			incl. SW and description (Ger/US)					RAID Ctrl, Battery Backup Unit
			64/33 PCI Controller, 330mm					max. 1x per Controller
			3.3V and 5V tolerant signaling
			max. 4x per system
			S26361-F2386-E32					S26361-F2190-E128
			RAID Ctrl, Cache Upgrade 32MB					4-channel RAID Controller U160
			32 MB SDRAM ECC Cache					Mylex / LSI
			max. 1x per Controller					eXtremeRAID 2000 (Big Apple)
								128MB SDRAM ECC Cache
								BBU
			S26361-F2386-E10					connector: internal: 2x HD 68;
			RAID Ctrl, Battery Backup Unit					external: 4x VHDCI
			max. 1x per Controller					incl. SW and description (G/USA)
	4x							64/33 PCI Controller, 330 mm
								3.3V and 5V tolerant signaling
				as soon as available				max. 4x per system
			S26361-F2752-E128
			2-channel RAID Controller U320
			Adaptec
			2200S
			128MB SDRAM ECC Cache
			BBU optional
			plug: internal 2x HD68;
			external: 2x VHDCI
			without cable
			incl. SW and description (Ger/US)
			64/66 PCI controller, 180mm
			3.3V and 5V tolerant signaling
Max. 8 controllers			max. 4x per system
in basic unit
to be continued			S26361-F2752-E10
on previous page			Cache Battery Backup Unit
			max. 1x per controller
					The fitting connection cables can be found in the
					configurator "external storage systems"
		E

4x

Fujitsu Siemens Computers	9 of 12
Enterprise Products - PRIMERGY Server