Fujitsu manual System configurator and order-information guide, PRIMERGY R450, Status, 4x, 8 of

C

System configurator and order-information guide

PRIMERGY R450 Status 2003-10-24

Section VII

SCSI-/Fibre-channel controller

A. on-board SCSI Controller for internal hard disks

2-channel U160-SCSI controller on-board; included as standard

The following cabling is standard, if no Disk Array Controller is used

1.Channel A of the U160 controller is connected to the 1st backplane for 3 HDs

2.Channel B of the U160 controller is connected to the 2nd backplane for 3 HDs

S26361-F2287-E15	This interface is only configurable if a RAID Controller
External on-board SCSI Interface	besides the 0-channel RAID Controller is used
Cable and external	See section Disk Array Controlller
connector interface
max. 2x per system for external

B. SCSI - controller for external hard disk extensions and external peripheral devices.

4x

5x

while stocks last

SNP:SY-F1722E1-P

SCSI Controller UW, DE

Adaptec 2944UW (HBA)

1 channel differential-ended max. 40MB/s; without cable

32/33 PCI, min. 170mm

int: LD50 + HD68, ext: HD68(S)

SW:

max. 2x per system

S26361-F2399-E1

SCSI U160 Controller

Adaptec SCSI card 29160

1 channel: LVD+Fast/Ultra (decoup.) LVD con. for HD, withoud cable Fast/Ultra con. access. drives

64/66 (32/33) PCI, min. 180mm

int: Fast 50-pin or Ultra HD68

+LVD HD68; ext: HD68(LVD) SW:

max. 2x per system

Controller for the connection of a EMC Symmetrix (only available as option)

Supported only in Microsoft Windows NT and Windows 2000 operating systems

C. Fibre Channel controller for subsystems and SAN

4x

while	stocks last		while	stocks last
SNP:SY-F2244E1-P			SNP:SY-F2244E2-P
1GBit/s FC Controller			1GBit/s FC Controller
Qlogic			Qlogic
QLA 2200			QLA 2200F, full height braket
1 Channel 1GBit/sec FC Controller			1 Channel 1GBit/sec FC Controller
CU (copper) Interface			MMF(Multimode Fibre) Interface
incl. SW and description (Ger/US)			incl. SW and description (Ger/US)
PCI 64Bit / 66MHz, 175mm			PCI 64Bit / 66MHz, 175mm
3.3V and 5V tolerant signaling			3.3V and 5V tolerant signaling
max. 4x per system			max. 4x per system
					while	stocks last
		S26361-F2843-E1			S26361-F2624-E1
		2GBit/s FC Controller			2GBit/s FC Controller
		Emulex			Emulex
		LP9802			LP9002L
		1 Cannel 2GBit/sec FC Controller			1 Channel 2GBit/sec FC Controller
		LC Interface for 50um Fiber			LC Interface for 50um Fibre
		PCI 64Bit / 133MHz, 170mm			PCI 64Bit / 66MHz, 170mm
		3.3V and 5V tolerant signaling			3.3V and 5V tolerant signaling
		max. 4x per system			max. 4x per system

suitable for 64Bit/66MHz PCI-Slot

Attention

2GBit/s FC Controller require other interface connectors for the optical cables than 1GBit/s fibre channel.

SNP:SY-F1826L1-P

FC Ctrl for EMC2 Attachment

Emulex LP8000

1 channel 100MB/s

MMF (Multimode Fibre) Interface Connector: Duplex SC

without cable, order seperately

incl. SW a. description (Ger/US)

PCI 64Bit/33MHz controller

max. 4x per system

Supported only in Microsoft Windows NT and Windows 2000 operating systems.

Controller for the connection

of a EMC Symmetrix, FibreCAT (only available as option)

There are other components such as switches, GBICs or cables which can be ordered for fibre channel SAN attachments. (see price list)

to be continued on next page

All controllers for the connection of external storage systems are delivered without cables For the configuration of external cabling see the configurator for external storage systems

D

Fujitsu Siemens Computers	8 of 12
Enterprise Products - PRIMERGY Server