Fujitsu S-5582 manual Primary Slave Submenu of the Main Menu

L i f e B o o k S S e r i e s B I O S

Primary Slave Submenu of the Main Menu

The Primary Slave submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as the Main menu. Your notebook auto-senses the charac- teristics of the internal CD-ROM Drive installed. You

will not need to modify these settings, they are displayed for your reference.

Note that actual drive labels shown may vary.

PhoenixBIOS Setup Utility

Main

Primary Slave [HITACHI DVD-ROM GD-S250-(PS)]		Item Specific Help
Type:	[Auto]	Select ATA/ATAPI drive
		installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
PIO Transfer Mode:	[Fast PIO 4]	The BIOS auto-types the
DMA Transfer Mode:	[Multiword DMA 2]	drive on boot time.
		Except [Auto]
		You enter parameters of
		the drive.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Primary Slave Submenu

Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the type
	■	None		automatically identified by the BIOS at POST. If None is selected, all
	■	CD-ROM		of the following Set-up items do not appear. Select CD-ROM,
	■	SuperDisk		SuperDisk or Hard Disk for appropriate drive type installed at
	■	Hard Disk		this connection.
Multi-Sector	■	Disabled	[Disabled]	This option cannot be changed when Auto is selected. Specify the
Transfers:	■	2 Sectors		number of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
	■	32 Sectors
	■	64 Sectors
	■	128 Sectors

8