Fujitsu S-5582 manual C A U T I O N, Menu Field, Options, Default, Description

M a i n M e n u

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Sectors:	■	A number	–—	This item appears only when Auto is selected and the type is
		between 0		identified as hard disk, or User is selected. When User is selected,
		and 63		you can change the value. This field is changed by incrementing
				(pressing the [Spacebar]) or by typing in the number.
Maximum	Display only		–—	Displays the maximum capacity of the drive calculated from the
Capacity:				parameters of the hard disk when Auto is selected and the type
				is identified as hard disk, or User is selected.
Multi-Sector	■	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected. Specify the
Transfers:	■	2 Sectors		number of sectors per block for multiple sector transfer. MAX refers
	■	4 Sectors		to the size the disk returns when required.
	■	8 Sectors
	■	16 Sectors
	■	32 Sectors
	■	64 Sectors
	■	128 Sectors
LBA Mode Control:	■	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder,
	■	Enabled		Head, Sector addressing. This option cannot be changed when
				Auto is selected.
PIO Transfer	■	Standard	[Fast PI0 4]	Selects the method for moving data to/from the drive. Autotype
Mode:	■	Fast PIO 1		the drive to select the optimum transfer mode. This option cannot
	■	Fast PIO 2		be changed when Auto is selected. Multi-word DMA is automati-
	■	Fast PIO 3		cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to
	■	Fast PIO 4		mode 2 for Fast PIO 4 / DMA.
DMA Transfer	■	Disabled	[Ultra DMA 2]	Selects the method for moving data to/from the drive. Autotype
Mode:	■	Multiword		the drive to select the optimum transfer mode. This option cannot
		DMA 1		be changed when Auto is selected.
	■	Multiword
		DMA 2
	■	Ultra DMA 0
	■	Ultra DMA 1
	■	Ultra DMA 2

C A U T I O N

Abootable CD-ROM may have either a floppy disk for- mat or a hard drive format. When the bootable CD- ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for- mat CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designa- tions, however, your application software will use the new designations.

C A U T I O N

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

7