Fujitsu S7020D manual Hard Disk Security Submenu of the Security Menu, Space

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security Submenu is for configuring hard disk security features.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings	Exit
	Hard Disk Security			Item Specific Help
Serial ATA Port 0 Password Is:			Clear
Primary Master Password Is:			Not Available
Set Serial ATA Port 0 Password			[Enter]
Set Primary Master Password			[Enter]
Password Entry on Boot:			[Disabled]

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 14. Hard Disk Security Submenu

F9 Setup Defaults

F10 Save and Exit

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.

Menu Field	Options		Default	Description
Serial ATA Port 0	---		---	A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
Password Is::				and Clear when it is not.
Primary Master	---		---	A display-only field. Not Available is displayed.
Password Is:
Set Serial ATA Port	---		[Enter]	Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
0 Password				seven characters long and include only letters or numbers (no symbols). Passwords
				are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
				ing characters in the Enter New Password field and in the Re-enter New Password
				field. When a Serial ATA Port 0 Password is set it must be used to access the hard
				disk. Data on the hard disk cannot be read on other systems.
Set Primary	---		[Enter]	Not currently available.
Master Password
Password Entry on	■	Disabled	[Disabled]	When this is disabled, it is not necessary to enter the password before booting.The
Boot:	■	Enabled		hard disk is still password-protected without entering a password.

22