Fujitsu S7020D manual Primary Master Submenu of the Main Menu

M a i n M e n u

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what primary devices are installed.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Primary Master [MATSHITADVD-RAM UJ-841S-(PM)]		Item Specific Help
Type:	[Auto]	Select ATA/ATAPI drive
		installed here.
Multi-Sector Transfers:	[Disabled]
LBA Mode Control:	[Disabled]	[Auto]
Transfer Mode:	[Standard]	The BIOS auto-types the
Ultra DMA Mode:	[Disabled]	drive on boot time.
		[None]
		The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 3. Primary Master Submenu

Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
	■	None		ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
				at POST. If None is selected, the following Set-up items do not appear.
Multi-Sector	■	Disabled	[Disabled]	This option cannot be changed when Auto is selected. Specify the num-
Transfers:	■	2 Sectors		ber of sectors per block for multiple sector transfer.
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode	■	Disabled	[Disabled]	Enables or disables Logical Block Addressing in place of Cylinder, Head,
Control:	■	Enabled		Sector addressing. This option cannot be changed when Auto is selected.

7