Hard Disk Security Submenu of the Security Menu

S e c u r i t y M e n u

The Hard Disk Security submenu is for configuring hard disk security features.

		Phoenix SecureCore(tm) Setup Utility
Info	System	Advanced	Security	Boot	Exit

	Hard Disk Security				Item Specific Help

Drive0:			Clear
* Set Master Password			[Enter]
* Set User Password			[Enter]
Drive1:			Not Available
Set Master Password			[Enter]
Set User Password			[Enter]
Password Entry on Boot:			[Enabled]
* Hard Disk Password cannot be set or changed if
the system is rebooted from OS. Choose “Save
Changes and Power Off” in Exit Menu to shut
down the system, then Hard Disk Password
can be set or changed on next boot.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 15. Hard Disk Security Submenu

Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field	Options	Default	Description


Drive0:	___	Clear	Display-only. Default is Clear. When the Drive0 Password has been set, the field
			changes to Set. When this password is set, the primary hard disk drive cannot be
			used in another system unless the password is entered.

Set Master	___	[Enter]	Sets, changes or cancels the Drive0 Master Password. The Drive0 Master Password
Password			may be up to seven characters long and must include only letters or numbers (no
			symbols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must
			be used to access the hard drive if it is used in another system. Note that the pass-
			word will not take effect until the system has been rebooted.

Set User	___	[Enter]	Sets, changes or cancels the Drive0 User Password. The Drive0 User Password may
Password			be up to seven characters long and must include only letters or numbers (no sym-
			bols). Passwords are NOT case-sensitive. When a Drive0 Password is set, it must be
			used to access the hard drive if it is used in another system. Note that the password
			will not take effect until the system has been rebooted.

Drive1:	___	Clear	Display-only. Default is Clear. When the Drive1 Password has been set, the field
			changes to Set. When this password is set, the primary hard disk drive cannot be
			used in another system unless the password is entered. When only one drive is
			installed (Drive 0:), [Not available] appears here.