■Remote control
!4 
!3
Indicator panel on main unit
!6 | !5 |
!8!7
A B C
Remote control photoreceptor
ENGLISH
!3POWER button
Press this button to switch between the power ON and standby statuses.
(The A POWER indicator is lit in blue when the power is ON and in red in the standby status.)
!4MUTE button
Press this button to switch between the “mute” and “play” statuses. The main unit goes into the “mute” status, or returns to the normal status, instantly.
(While the sound is muted, the A POWER indicator is lit in red.)
!5MODE buttons
Press the BASS button to emphasize low sounds (the MODE indicator C will switch from being lit in white to unlit).
Press the DIRECT button to cancel the effect of pressing the BASS button (the MODE indicator C will light in white).
!6PHASE button
Press the 
button to generate positive
phase sound (the PHASE indicator B will switch from being lit in amber to unlit). Press the 
button to generate negative phase sound (the PHASE indicator B will light in amber).
!7VOLUME button
Press the 
button to increase the volume. The flashing frequency of the POWER indicator A will increase as the volume increases. If you continue to press the button after the maximum volume has been reached, the indicator will stop flashing and remain
continuously lit after two seconds.
Press the 
button to reduce the volume. The flashing frequency of the POWER indicator A will decrease as the volume decreases. If you continue to press the button after the minimum volume has been reached, the indicator will stop flashing and remain continuously lit after two seconds.
!8ILLUMINATION button
Press this button to toggle between two levels of illumination for the indicators.
Advice
Settings are retained in memory even when the main power supply is turned OFF.
The settings (indicator statuses) on shipping from the factory are indicated to the right.
POWER ON | Blue/lit |
PHASE Positive phase Amber/off
MODE BASS White/off
- 23 -
