ENGLISH
rH.P.F selector switch
When signals of frequencies higher than the
When the switch is ON, signals of frequencies higher than the
tAUTO POWER switch
This switch turns the auto power function ON or OFF.
When the auto power switch is set to ON, the auto power function operates, meaning that the subwoofer goes into the standby status if no input signal is received for 5 minutes (the POWER indicator switches from blue to red.) When the next input signal is received, the power is automatically turned back on (the POWER indicator switches from red to blue). When the subwoofer is used at extremely low volumes, set this switch to OFF to avoid erroneous operation.
yPOWER switch
This switch turns the main power supply ON and OFF.
uXLR input terminal
This is the terminal where signals are input if the subwoofer (super woofer) output terminal on the AV amplifier or other device, or the amplifier line output terminal, is an XLR connector.
iLINE input terminals
These terminals input signals from the subwoofer (super woofer) output terminals on the AV amplifier or other device, or e.g. the amplifier line output terminal.
oLINE output terminals
These terminals convert the signals input to the input terminals u, i, !0to the line output level (they are not linked to the volume control on the main unit).
!0Speaker input terminals
These terminals input the speaker output signals from the amplifier.
!1Speaker output terminals
These terminals output, unchanged, the signals input to the speaker input terminals !0.
!2AC IN terminal
This terminal is connected to a household AC power outlet via the power cable provided as an accessory.
- 22 -
