1-2 XG2000 Components
This section explains the names and functions of the various XG2000 components, including the various indicator LEDs.
XG2000 front
The following explains the names and functions of the components at the front of the XG2000.
Port 1 - 20 |
| |
| ||
upper stand : odd number |
| |
Link/Act LED |
| |
lower stand : even number | Serial Port | |
| Link/Act LED | Dump Switch |
|
| |
|
| Status LED (Status) |
|
| Alarm LED (Alarm) |
|
| Power LED (Power) |
• | Ports | XFP modules which connect to the IEEE802.3 ae/ak compliant | ||
|
|
| 10 Gigabit network served by the XG2000. Connection method | |
|
|
| varies depending on which XFP modules are installed. | |
• | Link/Act LEDs (Green) | Displays the condition of respective port. | ||
|
|
| Each LED lights when a link is established on its port. | |
|
|
| The link is established about few seconds after the received | |
|
|
| signal is detected. | |
• | Dump Switch | Used to collect maintenance information. | ||
• | Used when performing maintenance or adjusting the settings | |||
|
|
| (LAN connection). | |
| - | Mng - LAN Speed LED (Orange) Lights if the link is | ||
| - | Mng - LAN Link LED (Green) | Lights when the link is established. | |
• | Serial Port | Used when performing maintenance or adjusting the settings | ||
|
|
| (Console connection). | |
• | Status LED (Green) | Lights when the XG2000 is in an operable state. | ||
• | Alarm LED (Orange) | Lights when there is a problem with the XG2000. | ||
• | Power LED (Green) | Lights when the XG2000 is receiving power. | ||
16
