Fujitsu XG2000 manual 3Installation of XFP modules, Installing the XFP modules

2-3Installation of XFP modules

This section describes the installation of the XFP modules.

2-3-1 Installing the XFP modules

The following explains how to install the XFP modules in the XG2000.

1. Install the XPF module in the XG2000.

How to install the XFP module is the following,		2
(1)	Insert the XFP module with the cable connector facings outward. In cases installing the
	XFP module in an odd port number, the slot connector facings down. Otherwise, in cases
	installing the XFP module in an even port number, the slot connector facings up.
(2)	Slide the XFP module into the slot until it snaps into place without the lever lifting.

Label

Installation of XFP modules

31