Fujitsu Siemens Computers 21P4 Technical data, VESA-DDC-compatible VGA interface, Accessories

Colour monitor 21P4

Technical data

Dimensions and weight
CRT:	53 cm (21“)
Visible diagonals:	50 cm
Dot pitch:	0.26 mm
Maximal resolution:	1920 x 1440 pixels
Dimensions (W x H x D):	504 mm x 506 mm x 482 mm
Weight:	25.7 kg
Accessories:	Power cable (1.8 m), Data cable (1.8 m)
Storable display modes:	18 (8 of which are preset)
Electrical data
Video:	analogue, positive, 0.7 Vpp, 75 Ohm
Synchronisation:	TTL
Horizontal frequency:	30 kHz .... 115 kHz (multi-scanning)
Refresh rate:	50 Hz .... 160 Hz
Maximum pixel rate:	320 MHz
Power supply:	100 V - 240 V± 10%, 60 Hz/50 Hz ± 3 Hz, < 2 A
Power consumption (see power	< 120 W (ON, Normal mode)
management):	< 3 W (OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:	10 °C .... 40 °C
Humidity:	10 % .... 80 %
Limit range of operation:	0 °C .... 60 °C
Humidity:	5 % .... 90 %
Condensation must be avoided.

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.

i	If the monitor 21P4 is not yet displayed in the list of monitors, you can select one of the
	following monitors instead:
	Fujitsu Siemens, Siemens or Siemens Nixdorf 21P3, 21T1, MCM 2110, MCM 2111

20 - English A26361-K886-Z100-1-5E19