Fujitsu Siemens Computers manual Connecting the monitor, Colour monitor 21P4

Colour monitor 21P4

Connecting the monitor

Information on the computer connections is contained in the operating manual for your computer.

!	Observe the safety precautions in the chapter "Important notes" in this operating manual.
	Do not cover the ventilation openings of the monitor.

If you are assembling monitors beside each other, there must be a minimum distance of 30 cm between monitors of the same constructional type, to avoid image distortion. With different monitors, the distance must be increased, if necessary.

Because of its weight, the monitor must be placed on a stable surface. Do not place the monitor on your computer.

Ê Be sure that the monitor and the computer are switched off.

1 = Power connector

2 = D-SUB connector

3 = BNC connectors

12 3

!The computer power plug must be pulled out!

The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the system unit.

!	CE conformance and optimum picture quality are guaranteed only if you use the data
	cable supplied.

8 - English A26361-K886-Z100-1-5E19