30
LifeBook C Series BIOS
EXIT MENU – LEAVING THE SETUP UTILITY

The Exit Menu is used to leave the setup utility. Follow

the instructions for Navigating Through the Setup

Utility to make any changes. (See Navigating Through

The Setup Utility on page 2 for more information.)

The following table shows the names of the menu fields

for the Exit menu, the default settings and a description

of the field's function and any special information

needed to help understand the field's use.

Figure 19. Exit Menu

Table 19: Fields, Options and Defaults for the Exit Menu

Menu Field Optional Keyboard
Shortcut Default Description
Exit Saving
Changes
Press F10 key –— Exit Saving Changes and Exit will store all the entries on every
menu of the setup utility to the BIOS memory and then exit the
setup utility. A confirmation message Save Configuration
changes and exit now? [Yes] [No] will be displayed.
Exit Discarding
Changes
–— –— Selecting Exit Discarding Changes and Exit will exit the setup
utility with out writing to the BIOS memory. A setup warning
message Configuration has not been saved! Save
before exiting? [Yes] [No] will be displayed when your
settings have changed. When the BIOS recognizes the Exit
Discarding Changes selection it will load the operating system and
begin operation.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Main Advanced Security Power Savings Boot Exit
Item Specific Help
Exit System Setup and
save your changes to
CMOS.
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
▲
EarthlingBIOS.fm Page30 Thursday, April 11, 2002 9:48 AM