Cisco Systems BEFSR41 manual The Administration Tab - Factory Defaults

EtherFast Cable/DSL Router with 4-Port Switch

The Administration Tab - Factory Defaults

The Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings.

Factory Defaults

Restore Factory Defaults. To clear all of the Router’s settings and reset them to its factory defaults, click the Yes radio button.

Note: Do not restore the factory defaults unless you are having difficulties with the Router and have exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all of your configuration settings.

After you have clicked the Yes radio button, click the Save Settings button to restore the Router to its factory defaults, or click the Cancel Changes button to undo your change. Help information is shown on the right-hand side of the screen.

Chapter 5: Configuring the Router

Figure 5-28: Administration Tab - Factory Defaults

35

The Administration Tab - Factory Defaults