EtherFast Cable/DSL Router with
What’s in this Guide?
This user guide covers the basic steps for setting up a network with a router. After going through “Chapter 3:
Getting to Know the Router,” most users will only need to use the following chapters:
•Chapter 4: Connecting the Router
This chapter instructs you on how to connect the Router to your cable or DSL modem, PCs, and peripherals, such as a printer.
•Chapter 5: Configuring the Router
This chapter explains how to configure the Router using your web browser and the Router’s
When you’re finished with the basic steps, then you are ready to connect to the Internet.
You also have other chapter available for reference:
•Chapter 1: Introduction
This chapter describes the Router’s applications and this User Guide.
•Chapter 2: Networking Basics
This chapter briefly explains how a network functions.
•Appendix A: Troubleshooting
This appendix describes some possible problems and solutions, as well as frequently asked questions, regarding installation and use of the Router.
•Appendix B: Upgrading Firmware
This appendix explains how you can upgrade the Router’s firmware.
•Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter
This appendix instructs you on how to find the MAC address or Ethernet address of your PC’s Ethernet network adapter.
•Appendix D: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing the TCP/IP protocol.
•Appendix E: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Chapter 1: Introduction | 2 |
What’s in this Guide?
