Fujitsu Siemens Computers E-6575, E-6595, E-6555 manual Irq

A d v a n c e d M e n u

Table 5: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu

Menu Field	Options		Default	Description
Serial Port:	■	Disabled	[Enabled]	Configures the serial port using either no configuration (Disabled), a user
	■	Enabled		defined configuration (Enabled), or by allowing the BIOS or OS to choose
	■	Auto		the configuration (Auto).
I/O Address:	■	3F8 - 3FF	[3F8 - 3FF]	Allows user to set the serial port base I/O address when serial port is
	■	2F8 - 2FF		Enabled.
	■	3E8 - 3EF
	■	2E8 - 2EF
Interrupt:	■	IRQ 3	[IRQ 4]	Allows user to set the serial port interrupt when serial port is Enabled.
	■	IRQ 4
	■	IRQ 10
	■	IRQ 11
Infrared Port:	■	Disabled	[Enabled]	Configures the infrared port using either no configuration (Disabled), a user
	■	Enabled		defined configuration (Enabled), or by allowing the BIOS or OS to choose
	■	Auto		the configuration (Auto).
Mode:	■	IrDA	[FIR]	When the infrared port is enabled this option is available allowing
	■	FIR		the user to set the mode for the infrared port.
I/O Address:	■	3F8 - 3FF	[2E8 - 2EF]	Allows user to set the infrared port I/O address when the
	■	2F8 - 2FF		infrared port is Enabled.
	■	3E8 - 3EF
	■	2E8 - 2EF
Interrupt:	■	IRQ 3	[IRQ 3]	Allows user to set the infrared port interrupt when the infrared
	■	IRQ 4		port is Enabled.
	■	IRQ 10
	■	IRQ 11
I/O address:	■	400 - 43F	[400 - 43F]	Allows user to set the infrared port I/O address when the
	■	480 - 4BF		infrared port is Enabled.
	■	500 - 53F
	■	580 - 5BF
DMA Channel:	■	DMA 1	[DMA 3]	Allows user to set the infrared port DMA Channel when the
	■	DMA 3		infrared port is Enabled.
Parallel Port:	■	Disabled	[Enabled]	Configures the parallel port using either no configuration (Disabled), a user
	■	Enabled		defined configuration (Enabled), or by allowing the BIOS or OS to choose
	■	Auto		the configuration (Auto).
Mode:	■	Output	[Bi-directional]	When the parallel port is enabled this option is available allowing the user
		Only		to set the mode for the parallel port. Bi-directional allows two-way transfer
	■	Bi-direc-		of information between your notebook and a connected parallel device.
		tional		Output Only (Half Duplex) allows information to be transferred in only one
	■	ECP		direction, from your notebook to the printer or similar device. ECP Mode
				allows communication with the ECP class of parallel I/O devices.
I/O address:	■	378 - 37F	[378 - 37F]	Allows user to set the parallel port base I/O address when the
	■	278 - 27F		parallel port is Enabled.
	■	3BC - 3BF
Interrupt:	■	IRQ 5	[IRQ 7]	Allows user to set the parallel port interrupt when the parallel
	■	IRQ 7		port is Enabled.

13