Fujitsu Siemens Computers E-6575, E-6595, E-6555 manual Exiting from the Security Menu

Table 14: Fields, Options and Defaults for the Security Menu

Menu Field	Options		Default	Description
Minimum User	–—		[0]
Password Length:
Password on Boot:	■	Disabled	[Disabled]	When set to First Boot, a password (User or Supervisor) is required
	■	First Boot		just once after the Power On Self Test (POST) before the operating
	■	Every Boot		system will be read from a disk. When set to Every Boot, a pass-
				word (User or Supervisor) is required every time after the Power On
				Self Test (POST) before the operating system will be read from a
				disk. When set to Disabled no password is required.
Password on	■	Disabled	[Disabled]	When Enabled, a PS/2 keyboard and mouse are locked out when
Unattended Boot	■	Enabled		an unattended boot occurs via LAN until a password is entered.
Password on	■	Disabled	[Disabled]	When set to Enabled, a password (User or Supervisor) is required
Resume:	■	Enabled		before the operating system will resume. When set to Disabled no
				password is required. If no Supervisor Password is set this feature is
				not available and no password is required.
Boot from Remov-	■	All	[All]	Enable password allows supervisor access only.
able Media:	■	Supervisor only
Floppy Disk	■	All	[All]	Enable password allows supervisor access only.
Access:	■	Supervisor only
Hard Disk Security:	–—		–—	Configures hard disk security features
Owner	–—		–—	Sets Owner information.
Information:
Hard Disk Boot	■	Normal	[Normal]	Sets protection mode for hard disk drive.
Sector:	■	Write Protected
Security Panel on	■	Disabled	Enabled	Enables or disables the Security Panel feature upon Resume from
Resume	■	Enabled		Suspend.

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

25