Fujitsu Siemens Computers E-6595 Fields, Options and Defaults for the Security Menu, Features

L i f e B o o k E S e r i e s B I O SS e c u r i t y M e n u

			PhoenixBIOS Setup Utility
	Main	Advanced	Security	Power	Boot	Info	Exit
	Supervisor Password Is:			Clear			Item Specific Help
	User Password Is:			Clear
						Press <Enter> key to
	Set Supervisor Password			[Enter]		set Supervisor Password
	Set User Password			[Enter]		to enable any password
	Minimum User Password Length:			[0]		features.
	Password on Boot:			[Disabled]		Then password entry is
	Password on Unattended Boot:			[Disabled]		required to enter BIOS
	Password on Resume:			[Disabled]		Setup.
	Boot from Removable Media:			[All]
	Floppy Disk Access:			[All]
	Hard Disk Security
▲	Owner Information
▲
	Hard Disk Boot Sector			[Normal]
	Security Panel on Resume			[Enabled]

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values

Enter Select▲Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 14. Security Menu

Table 14: Fields, Options and Defaults for the Security Menu

Menu Field	Options	Default	Description
Supervisor	–—	Clear	A display-only field. Set is displayed when the system supervisor
Password is:			password is set and Clear when it is not.
User Password is:	–—	Clear	A display-only field. Set is displayed when the general user
			password is set, and Clear when it is not.
Set Supervisor	–—	[Enter]	Sets, changes or cancels the Supervisor Password. The Supervisor
Password			Password may be up to seven characters long and must include
			only letters or numbers (no symbols). Passwords are NOT case-
			sensitive. To cancel a password press the Enter key instead of
			entering characters in the Enter New Password field and in the
			Re-enter New Password field. When a Supervisor Password is set
			it must be used to access the BIOS setup utility.
Set User Password	–—	[Enter]	This field can only be accessed if the Supervisor Password is set.
			Sets, changes or cancels the User Password. The User Password
			may be up to seven characters long and must include only letters
			or numbers (no symbols). Passwords are NOT case-sensitive. To
			cancel a password press the Enter key instead of entering characters
			in the Enter New Password field and in the Re-enter New Password
			field. When a User Password is set it must be used to access the
			BIOS setup utility.

24