FUNAI F20LCTE-A SET UP for USE, Language Selection, Channel Presetting, ADD/DELETE Function

SET UP FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1Connect antenna or cable first, then connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen, press POWER without unplugging the power cord.

2Press POWER to turn on the TV.

3Press MENU so that the set up menu appears on the TV screen.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP
LANGUAGE	[ENGLISH]
CAPTION	[OFF]
TV SOUND	[MAIN]
BACK LIGHT	[BRIGHT]

4Press CH ▼or ▲ to point to “LANGUAGE”.

5Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS] by using the VOL ▼or ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

	V-CHIP SET UP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	TV SOUND	[MAIN]
	BACK LIGHT	[BRIGHT]
	Press MENU to exit.
6

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1Press POWER to turn on the TV.

2Press MENU so that the set up menu appears on the TV screen.

3Press the CH ▼or ▲ to point to “CHANNEL SET UP”. Then press VOL ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP
LANGUAGE	[ENGLISH]
CAPTION	[OFF]
TV SOUND	[MAIN]
BACK LIGHT	[BRIGHT]

4Press CH ▼or ▲ to point to “AUTO PRESET CH”. Then press VOL ▲.

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. When there is no signal to ANT in jack, “NO TV SIGNAL” will appear. In this case, please check the antenna connections, then try the auto preset again.

●When you press CH ▼or ▲ after selecting “AUTO PRESET CH”, the tuner will stop at the memorized channels only.

●The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try AUTO PRESET CH action again when reception conditions are better.

ADD/DELETE FUNCTION

1Press MENU so that the set up menu appears on the TV screen.

2Press CH ▼or ▲ to point to “CHANNEL SET UP”. Then press VOL ▲.

- TV SET UP -

PICTURE

CHANNEL SET UP

V-CHIP SET UP
LANGUAGE	[ENGLISH]
CAPTION	[OFF]
TV SOUND	[MAIN]
BACK LIGHT	[BRIGHT]

3Press VOL ▲ to select “ADD/DELETE CH”.

- CHANNEL SET UP -

ADD/DELETE CH (TV)

AUTO PRESET CH

4Use CH ▼or ▲ to select the channel you wish to put into memory or to erase from memory.

●Press VOL ▲ to highlight the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press VOL ▲ to highlight the channel number in LIGHT RED if you wish to erase the channel from memory.

5Press MENU to exit.

- 9 - EN

ENGLISH