FUNAI MBP5130/F7 owner manual Audio, Drc

Note for “HDMI Video Resolution”

•Even if you set “HDMI Video Resolution” setting to “Auto”, when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output.

•Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.

•You cannot change the video resolution during playback of Blu-ray Discs or AVCHD files. To change the resolution, stop playback.

•In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI cable

is recommended) and select “Auto” if the connected TV is compatible with 1080p24 frame input.

•Even if the connected TV is compatible with 1080p24 frame input and you set “HDMI Video Resolution” setting to “Auto”, when the contents of the disc are not compatible for 1080p24 frame, 1080p60 frame will be output.

•If the picture is not output properly to the TV because of “HDMI Video Resolution”, press and hold [BPLAY] on the front panel for more than 5 seconds. Both settings will be reset to the default automatically.

•For AVCHD, 24-frame film material will be output as 60 frame, even if the connected device is compatible with 1080p24 frame input and “HDMI Video Resolution” is set to “1080p24”or “Auto”.

Audio

Audio

BD Audio Mode	Mix Audio Output
HDMI Audio Out	HDMI Multi (Normal)
Down Sampling	On
DRC	Auto

Setting items	Descriptions
BD Audio Mode	For BD, selects whether
	to output the secondary
	and interactive audio
	with primary audio if it
	is available or only the
	primary audio. Refer to
	“Setting the BD Audio
	Mode” on page 24.
HDMI Audio Out *1	Sets the audio format
	for the audio output
	from HDMI OUT jack.
	Refer to page 32.
Down Sampling	Sets the digital audio
	output when playing
	back BD or DVD
	recorded in LPCM.
DRC	Sets whether to
	compress the range of
	sound volume (dynamic
	range control) when
	Dolby Digital, Dolby
	Digital Plus or Dolby
	TrueHD audio is played
	back.
	When “Auto” is
	selected,this unit
	detects DRC setting of
	the disc and set “DRC”
	setting to “On” or “Off”
	automatically when the
	discs recorded in Dolby
	TrueHD format are in
	playback.

*1) Under following circumstances, “HDMI Multi(Normal)” and “HDMI Multi(LPCM)” are not available.

-HDMI cable is not connected to HDMI OUT jack.

-Connected TV is off.

-Connected TV is not compatible with audio output.

•To select the setting items and options, refer to “ Custom” on page 30.

•“ Quick” menu consists of the setting menus frequently used, and they are accompanied with .

31