The indicators show the progress status...
(Success) PLAY indicator lights up.
STOP |
| PLAY | STANDBY/ON | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Error)* PLAY and STANDBY/ON indicators flash.
STOP |
| PLAY | STANDBY/ON | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* If the indicator shows Error...
1)Unplug the AC power cord for about 10 seconds,
2)Confirm the current software version.
3)If the software version is updated, the software update has succeeded. If not, please try again.
Note
•Please do not unplug the AC power cord while updating the software.
•All settings will remain the same even if you update the software version.
•The version of Netflix will also be updated if newer version of Netflix is available when updating the software.
Network Update
You can update the software by connecting the unit to the Internet.
1.In “Software Update” menu, use [K/L] to select “Network Update”, then press [OK].
2.Use [K/L] to select “Yes”, then press [OK].
•This unit will then start checking for the latest software version.
3.Confirmation message will appear. Use [s/B] to select “Yes”, then press [OK].
•The unit will start downloading the latest software version.
4.When the download completes, confirmation message will appear. Press [OK].
•The unit will start updating the software version.
•It may take a while to complete the updating.
5.After updating finishes, this unit will restart and open the disc tray automatically.
Note
•In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary settings.
•For network connection, refer to “Connection to the Network” on page 12.
•For network setup, refer to “Network Connection” on page 39.
•Please do not unplug the AC power cord or LAN cable while executing the “Network Update”.
•All settings will remain the same even if you update the software version.
•The disc tray will open automatically after updating finishes. This is not a malfunction.
•The version of Netflix will also be updated if newer version of Netflix is available when updating the software.
Initialize
Menus to reset player settings, format SD card, clear erased
1.In stop mode, press [SETUP].
2.Use [K/L] to select , then press [OK].
3.Use [K/L] to select a desired option, then press [OK].
“Setup”:
Resets the setup menu to the default. The setting for “Parental”, “Network Connection” and “Mode Select” will not be reset.
“Format SD Card”
(Available only when an SD Memory Card is inserted.):
Initializes the SD Memory Card. After confirmation message appears, use [K/L] to select “Yes”, then press [OK].
“Erase Saved
“Erase Saved
Clears the supplemental data for the
“Network Settings”:
Resets the network setting to the default.
“Netflix Deactivate”:
Deactivates the connection to Netflix.
“Vudu Deactivate”:
Deactivates the connection to VUDU.
Initialize
Setup
Format SD Card
Erase Saved
Erase Saved
Network Settings
Netflix Deactivate
Vudu Deactivate
4.Confirmation message will appear. Use [K/L] to select “Yes“, then press [OK].
•Press [OK] again to complete the settings.
5.Press [SETUP] to exit.
Note
•Do not remove the SD Memory Card while executing the “Format SD Card” or the “Erase Saved
44