FUNAI MBP5130/F7 Front Panel, Unit can also be turned on by pressing these buttons, SD card slot

Front Panel

1 2* 3 4 5 6* 7 8

OPEN/CLOSE

STOP

PLAY STANDBY/ON

SD card

9

(*)The unit can also be turned on by pressing these buttons.

1.Disc tray

2.AOPEN/CLOSE button*

3.Infrared sensor window

4.CSTOP button

5.PLAY indicator

•This indicator lights up in green when discs or SD cards play back.

6.BPLAY button*

7.STANDBY/ON indicator

•This indicator lights up in red when the power is in the standby mode.

8.ySTANDBY/ON button

•Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)

•Press and hold for 10 seconds to shut down the unit.

9.SD card slot

Note

•This unit will be turned into the standby mode automatically after 25 minutes of no action.

Rear Panel
1	2	3	4	5	6

		COAXIAL
	L
LAN	HDMIOUT	Wireless LAN
	R
	AUDIO	VIDEO
	OUT	OUT

7

1.AC power cord

2.LAN terminal

3.HDMI OUT jack

4.AUDIO OUT jacks

5.DIGITAL OUT (COAXIAL) jack

6.Wireless LAN (Internal)

7.VIDEO OUT jack

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

•This unit does not have the RF modulator.

•Do not try to rip the internal wireless LAN from the unit.

7