–13 –EN
0C28
SELECTING THE LANGUAGE
1Plug in the TV/DVD power cord
Plug the TV/DVD power cord into a
standard AC outlet.
NOTE:
•If any digits appear in the corner of
the screen, press POWER without
unplugging the power cord.
Make sure ...
•Press POWER to turn on the TV/DVD.
NOTE: This function effects only the language on
the screen menu and not the audio source.
2Select “LANGUAGE”
Press SETUPon the remote control.
Press Arrow (K/L) to point to
“LANGUAGE”.
3Select “ENGLISH”,“ESPAÑOL”or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using ENTER.
4Exit the Language mode
Press SETUPto return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press SETUP, press Arrow (K/L) to point to
“IDIOMA[ESPAÑOL]” or “LANGAGE
[FRANÇAIS]”, then press ENTER, then press
SETUPon the remote control.
TV
CHANNEL SET UP
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/DVD channel selector to the
output channel of the cable box or satellite box (Ex
CH3), then select the channel to be viewed on the
Cable Box or Satellite Box.
Make sure ...
•Press POWER to turn on the TV/DVD.
1Select “CHANNEL SET UP”
Press SETUPon the remote control.
Press Arrow (K/L) to point to
“CHANNELSET UP”.
Then press ENTER.
2Begin auto ch programming
Press Arrow (K/L) to point to
“AUTO CH PROGRAMMING”.
Then press ENTER.
The tuner scans and memorizes all
the active channels in your area.
3After scanning
The tuner stops on the lowest memorized channel.
•When AUTO CH PROGRAMMING is activated
where there is no TVsignal input, “NO TV SIG-
NALS” will appear on the display after the com-
pletion of the channel scanning.
•The TV/DVD may recognize TVchannels to be
CATVchannels by the receiving conditions. In this
case, try auto ch programming again in the fine
receiving conditions.
TV
SET UP FOR USETV SECTION
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
BLANGUAGE [ENGLISH]
CAPTION [OFF]
- TV SETUP -
BCHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
BAUTO CH PROGRAMMING