PLAYING A DISC
BASIC PLAYBACK |
| GENERAL FEATURES |
|
|
|
Getting started
¡Turn on the power of amplifier and any other com- ponents, if necessary.
1Press [POWER].
¡The power will turn on.
2Press [OPEN/CLOSE A] to open disc load- ing tray.
3Place the chosen disc in the tray, with the label facing up.
DVD-V
DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or [K / L / s / B] to highlight your selection in the DVD main menu and press [ENTER] to confirm.
NOTES:
¡Select DVD mode by pressing [SELECT], then operate the DVD functions.
¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.
4Press [PLAY O].
¡The tray will close automatically and playback will then start from the first chapter or track of the disc.
¡Closing the disc tray manually or by pressing [OPEN/CLOSE A] also starts playback.
¡If the playback does not start automatically, press [PLAY O].
¡When you playback a DVD which features a title menu, it may appear on the screen. In this case, refer to “TITLE MENU” on this page.
5Press [STOP C] to stop playback.
DISC MENU
DVD-V
1Press [DISC MENU].
¡The DVD main menu will appear.
¡If the feature is not available, 
symbol may appear on the TV screen.
¡If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.
2Press [K / L / s / B] to select an item and press [ENTER] to confirm selection.
TITLE MENU
DVD-V
NOTES:
¡When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then the TV picture and sound appears in about 4 seconds. Similarly, when [POWER] is pressed to turn off in the DVD mode, this mode shuts down first and then the unit is turned off.
¡A “prohibited icon” may appear at the
ing operation, warning that a pro- hibited operation has been encoun- tered by the DVD or the disc.
¡With DVDs that use titles for playback program sig- nals, playback may start from the second title or it may skip these titles.
¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.
1Press [TITLE].
¡The title menu will appear.
¡If the feature is not available, 
symbol may appear on the TV screen.
2Press [K / L / s / B] to select an item, and press [ENTER] to confirm selection.
CALLING UP A MENU SCREEN DURING PLAYBACK
¡Press [DISC MENU] to call up the DVD menu. ¡Press [TITLE] to call up the title menu.
NOTE:
¡Contents of menu and corresponding menu opera- tions may vary between discs. Refer to the manual accompanying the disc for details.
- 20 - | EN |
