Connections

Connection to an Audio System

When you change the connections, all devices should be turned off.

Refer to the operation manual accompanying external devices for more information.

Method 1

Stereo system

AUDIO

Method 2

Dolby Digital decoder, MD deck or DAT deck

Analog audio input jacks

Audio cable (supplied)

COAXIAL Digital audio

input jack

Audio Coaxial Digital cable

DVD

(commercially available)

AUDIO OUT

 

DIGITAL

 

COAXIAL

This unit

<REAR PANEL>

AUDIO OUT

DVD/VCR

IN - AUDIO - OUT

L

R

or

DVD

AUDIO

DIGITAL

AUDIO OUT

OUT

L

R

Setting

Connection

If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder.

Unless connected to a Dolby Digital decoder.

Connecting to an MD deck or DAT deck.

Setup>Playback>Disc Audio>Digital Out>

Dolby Digital

Stream

PCM

PCM

* To complete these settings, refer to pages 69-70.

Note

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Note

By connecting this unit to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital Multi- channel surround sound as heard in the movie theaters.

The audio source on a disc in a Dolby Digital Multi- channel surround format cannot be recorded as digital sound by an MD or DAT deck.

Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

16 EN

Page 16
Image 16
FUNAI WV20V6 owner manual Connection to an Audio System, 16 EN, Digital Audio OUT