Furman Sound HA-6AB Introduction, Features, Description, H A - 6 A B / H A - 6 A B E M a n u a l

H A - 6 A B / H A - 6 A B E M a n u a l

Important Note: To obtain best results from this Furman Sound electronic product, please be sure to read this manual carefully before using it. Please fi ll out and return the Warranty Registration Card immediately to obtain full protection under the terms of the Limited Warranty, in case your ownership documents are lost. Please verify that the serial number shown on the Warranty Card matches the serial number on your unit.

INTRODUCTION

Congratulations on your purchase of a Fur- man Sound HA-6AB. You have chosen the most versatile headphone amplifi er available. The HA-6AB is a unique combination of a headphone amplifi er and a conventional power amplifi er, which can save the expense of an extra power amplifi er in many situations. Its high power capacity provides adequate head- phone listening levels without distortion in any environment. Additionally, the HA-6AB’s toroidal transformer assures noise-free performance. It eliminates electrical hum and mechanical noise from the unit itself, as well as leakage into other sensitive equipment, such as mic preamplifi ers, video monitors, etc. The HA-6AB is designed for recording studios, rehearsal studios, lan- guage labs, and for use in demonstrations of audio tracks or audio equipment.

FEATURES

Powers headphones and speakers

20 watts per channel, stereo

Toroidal power transformer for ultra- quiet performance

6 headphone outputs, each with its own volume control

Separate front panel switches for speakers and remote headphone outputs or a second set of speakers

Automatically switches to mono mode when right channel is not used

Signal-present and Overload LED’s for each channel

Ground lift switch

Power-on indicator

Convenient Remote/Satellites outlet provides signal for up to 12 remote headphone stations. (Such as the Furman HR-2 remote station.)

DESCRIPTION

The HA-6AB is a single rack space 20 watt per channel stereo amplifi er. Unlike a conventional power amplifi er, however, it has six headphone outputs (stereo phone jacks) on the front panel, each with its own volume control. When used for overdubbing or rehearsal, this provides more than adequate volume in all headphones (even low- impedance models), and allows each musician to set his or her own listening level. When overdub- bing is complete and the musicians remove their headphones, the HA-6AB can power the tape playback through a set of studio monitor speak-

2