MS Series Specifications
Inputs
Analog audio: | 2 (or 4) each female balanced XLR |
|
| CMRR: | >90 dB, 20 Hz to 20 kHz |
| Differential Input Impedance: | 24 kΩ |
| Maximum Input Level: | +25 dBu |
| Signal present indicator: | |
Digital audio: | 1 (or 2) each BNC, AES/EBU |
|
(if present) | Resolution: | 24 bit |
| Sampling Frequency: | 16 kHz to 96 kHz |
| Oversampling: | 8X |
| Internal Clock: | 256 x Sampling Frequency |
| THD+N: | |
| Dynamic Range: | 95 dB |
| Signal to Noise Ratio: | 97 dB |
| Channel Separation: | 95 dB |
| Internal Analog Filter: | |
Video: | 1 each BNC Video, auto sense NTSC/PAL | |
(if present) | Input level: | 1.0 |
|
| (to EIA |
Outputs
Analog audio: | 2 each male balanced XLR | +25 dBu into 1 kΩ |
| Maximum Output Level: | |
| Gain Trim: | ±6 dB (dual ganged stereo control) |
| Signal Present indicator: | |
| Differential Output Impedance: | 50 Ω with load capacitance of |
|
| up to 1 µF |
| Frequency Response: | 20 Hz to 200 kHz |
| THD+N: | .002% |
Headphone: | Power: | 270 mW into 56 Ω, both channels |
|
| driven |
| THD+N: | .003% |
Video (if present)
Display type: | TFT, LCD |
Screen Size (diagonal): | 1.8 inch |
Active Display Area: | 48.6 mm W x 39.6 mm H |
Number of pixels: | 280 W x 220 H |
Dot Pitch: | 0.127 mm W x 0.121 mm H |
Brightness: | 140 cd/m2 typical (140 cd/m2 min.) |
Contrast Ratio: | 100 typical (60 minimum) at |
| optimized viewing angle |
Viewing Angle: | Left/Right: ±45° H (at CR>10) |
Top/Bottom: | ±10°/30° V (at CR>10) |
11