Furuno 1932 MARK-2 Function Controls, Suppressing Noise, 3.13Adjusting Brilliance of Markers

3.11 Function Controls

The function controls (F1 and F2) work like the auto-dialing feature of a telephone, auto- matically executing the function assigned to them. The function can be turned of by press- ing appropriate function control again.

Default settings

F1: Shift (brief press) or Zoom (long press)

F2: Ring brilliance

How to register menu items

1.Press the [MENU] key.

2.Press [A/C SEA] (F1) or [A/C RAIN] (F2) to open the function menu.

	[ SETTING FOR F1 KNOB ]
	SSel by omnipad & press ENT.S
SHIFT/	EBL	SHIFT	ZOOM
ZOOM	OFFSET
RINGS	MODE	DISP	ECHO
		DATA	TRAIL
INT	NOISE	PULSE	ECHO
REJECT	REJ	LENGTH	STRTCH
TRAIL	TRAIL	TRAIL	TUNE
ON/OFF	TIME	TONE	A/M
GUARD	ALARM	DEAD	WATCH
IN/OUT	LEVEL	SECTOR	MAN
PANEL	MARK	CHARA	OTHER
DIMMER	BRILL	CTERS	MENU
EBL	VRM	NAV	WPT
REF	UNIT	TALKER	MARK
OWN	CUSOR	VECTOR	VECTOR
POSITN	POSITN	LENGTH	REF
HIS	COLLI	AUTO	NO
TORY	SION	ACQ	FNCTN

Figure 3-11 Function menu

3.Select function desired.

4.Press the [ACQ/ENTER] key.

5.Press the [MENU] key to close the menu.

3.12 Suppressing Noise

Electrical noise can be suppressed by turn- ing on “8. NOISE REJ” on the OTHERS menu.

3.13Adjusting Brilliance of Markers

“2. Mark Brill” on the OTHER menu adjusts the brilliance of markers other than the head- ing marker.

3.14 Outputting Target Position

Radar target position data can be output to a navaid in IEC 61162 format. Select the radar target with the cursor , and then press and hold down the [TLL] key to output the data. This function requires position data and head- ing signal.

3.15 Dead Sector

When the scanner is installed at a close dis- tance in front of the wheelhouse the radar should be set not to transmit within that area, to prevent microwave hazard. Ask your FURUNO representative ordealer to provide this feature.

3-8