WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel should work inside the equipment.
Turn off the radar power switch before servicing the scanner unit. Post a warn- ing sign near the switch indicating it should not be turned on while the scanner unit is being serviced.
Prevent the potential risk of being struck by the rotating scanner and exposure to RF radiation hazard.
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Turn off the power immediately if water leaks into the equipment or the equip- ment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock.
Use the proper fuse.
Fuse rating is shown on the equipment. Use of a wrong fuse can result in equipment damage.
Keep heater away from equipment.
Heat can alter equipment shape and melt the power cord, which can cause fire or electrical shock.
CAUTION
Do not use the equipment for other than its intended purpose.
Use of the equipment as a stepping stool, for example, can result in personal injury or equipment damage.
No one navigation device should ever be solely replied upon for the navigation of a vessel.
Always confirm position against all available aids to navigation, for safety of vessel and crew.
Two warning labels are attached to the display unit and scanner unit. Do not remove these labels. If labels are peeling off or are illegible, contact
a FURUNO agent or dealer.
<Display Unit> | WARNING | |
Name: Warning Label (1) | ||
To avoid electrical shock, do not | ||
Type: | remove cover. No | |
Code no.: | parts inside. | |
|
<Scanner Unit> | WARNING | |
Name: Radiation Warning | ||
Radiation hazard. Only qualified | ||
Label | ||
personnel should work inside scanner. | ||
Type: | Confirm that TX has stopped before | |
opening scanner. | ||
Code no.: |
| |
| ||
|
| |
|
|
ii
