Furuno CSH-23F/24F manual PORT/STARBOARD, Horizontal Slice Displays, Port/Starboard display

PORT/STARBOARD, HORIZONTAL SLICE DISPLAYS

The port/starboard display or horizontal slice display may be displayed by pressing the [HIST] key. The display shown de- pends on the setting of “HIST DSP/GRPH” in the USER menu.

Port/Starboard display

The port/starboard display takes echoes along the bearing (port, starboard) selected on the SYSTEM menu and displays them on the lower 1/3 of the screen. If the bearing width is set to 90 degrees, for example, the CSH-23F/24F displays echoes in both port and starboard directions. The picture is scrolled vertically to downward.

Port/Starboard Sampling Angle

Display

Sector

Picture Advance Direction

↓ ↓

B

- - -

- - -

- - -

- - -

Port Direction	Starboard
	Direction

APort/starboard sampling angle can be set between 0 and 180 degrees. Setting sequence: SYSTEM menu, HIST DISPLAY, PRT/STBD Sample.

BFixed at 6 degrees.

Figure 9-1 Port/starboard display

9-1