The [CURS (cursor)] key shifts the cursor to band or channel number.

To change the channel number, you can use the rotary control. The [FREQ/CH] control changes the number above the cursor, a band or channel designator.

ITU TELEX channels

To select the ITU TELEX channel 4012, for example, first select TLX with the [MODE] key. This radiotelephone is furnished with J2B class of emission. The J2B is compatible with F1B which may be used on other parties. You do not have to worry about F1B or J2B; you can just select TELEX mode for narrow-band direct-printing.

Press [RCL], [4], [0], [1], [2], [ENT], and a combination of TX frequency of 4178.0 kHz and RX frequency of 4215.5 kHz is selected with the display as below. To select only RX or TX frequency, hit [RX] or [TX] to start with.

RX freq

TX freq

BAND ITU CHANNEL NO.

DUP

DUP

R

R

0 2 4 6 8 10 S

0 2 4 6 8 10 S

AGC

AGC

TLX

TLX

NOTE: You can recall an ITU channel by entering 3 or 4 digits. To recall ITU telex channel 4012 by three digits, for example, select “TLX” then enter 412 (instead of 4012).

-1.9-

Page 17
Image 17
Furuno FS-1562-25, FS-1562-15 manual ITU Telex channels