Specifications of MF/HF Radiotelephone model FS-1562
The model
-IMO A.421(XI), A.610(15), A613(15), A.694(17)
-International Convention on Safety of Life at Sea 1974, as amended 1988 (GMDSS Conference)
-ITU Radio Regulations
-ETS 300 373
-IEC
-EC EMC Directive for CE marking requirements
-Other relevant rules
GENERAL
Communication System | Simplex or | ||
Frequency Range | 1.6 to 27.5 MHz (transmit), 0.1 to 30 MHz (receive) | ||
Frequency Resolution | Transmit: 100 Hz | Receive: 10 Hz | |
Class of Emission | J3E | SSB, suppressed carrier, signal channel containing analogue information, telephony; | |
|
| when 2182 kHz is first selected, H3E is set. | |
| H3E | SSB, full carrier, signal channel containing analogue information. | |
| J2B | for DSC, NBDP; SSB, suppressed carrier, signal channel containing quantized | |
|
| or digital information with the use of a modulating | |
|
| automatic reception | |
| F3C | weather facsimile, reception only | |
Frequency Error | ±10 Hz (Both Transmitter and Receiver) | ||
Number of Channels | Custom channels: 200 max programmed by Furuno authorized service representatives | ||
| ITU SSB/TELEX Channels as listed in Appendix | ||
| 2182 kHz (single action) | ||
| 2187.5 kHz (automatically selected on DSC equipment) | ||
Environmental | IEC 945: | ||
Power Supply | 24 VDC +30%, | ||
| Receive: | 2 A | |
| Transmit (max.): | ||
|
|
| |
Radiotelephone Signal Generator | Two tones of 2200Hz and 1300Hz transmitted alternately. | ||
TRANSMITTER
Output Impedance | 50 ohms |
|
|
Output Power | J3E/H3E: | ||
| J2B: | ||
|
| (FEC mode: reduced to 60 W) | |
| Tune: 10 to 20 W approx. |
| |
Power Reduction | 60 W |
|
|
Controls | Output HI/LOW, test |
| |
ANTENNA COUPLER
Power Capability | |
| |
Tuning System | CPU controlled fully automatic tuning system |
v
