Furuno GP-1850DF installation manual Speed Adjustment, Temperature Adjustment, Speed ADJ

Speed Adjustment

Adjust speed when you select own speed source "OWN PDDWHL".

1.Press the [MENU] key.

2.Press the software key labeled "DISPLAY OPTIONS".

3.Press the software key labeled "NEXT PAGE" to display the following display.

s SPEED SOURCE	GPS
TEMP SOURCE	OWN XDCR
TEMP GRAPH	OFF
ZOOM MARKER	OFF
SPEED ADJ.	+00%
TEMP ADJ.	+00.0° F
DEPTH ADJ.	+0.0ft

SPD	TEMP	DEPTH
12.3kt	62.5° F	2000.0ft

DGPS 3D

DISPLAY SETUP2

EDIT

RETURN

Figure 3-12 Display Setup 2 Display

4.Select "SPEED ADJ." by the arrow key.

5.For speed sensor-equipped sets, you may offset the speed readout if it is wrong. Run the boat at various speeds and watch the speed readout at the bottom of the screen. If it is unreasonably wrong, press the software key "EDIT" to dis- play the following message.

SPEED ADJ

▲

+00 %

▼

Figure 3-13 Speed Adjustment Display

6.Correct speed readout by the arrow key. The adjustment range is -50%~+50%. For example, if readout is 10% lower than actual speed, enter +10%.

7.Press the software key "RETURN".

8.Press the [PLOT] key to finish.

Temperature Adjustment

1.Press the [MENU] key.

2.Press the software key labeled "DISPLAY OPTIONS".

3.Press the software key labeled "NEXT PAGE" to display the following display.

3-8